Embedded Files
Built around sawhorse brackets, some 2x4s, and a 2x6. 1/2" hardware, 3/8 chain, bolt held with a castle nut. Chain offset on washers to produce downward angle, deflecting debris to the ground.
Collapses down to a small package with bolts/thumb screws holding it together for easy transport.
Collapses down to one solid package for easy transport
Added bolts/washers as a spacer to hold the legs, the eye bolts have nuts on the backside that made then sit cockeyed (visible in next picture). The silver rod is a long screw that attaches to a thumb screw to keep the collapsed structure together.
View showing the nuts on the backside
View showing the thumb screw (black, middle right)
Zoomed out view showing the spacers, bolts, thumb screws, and eye bolt nuts
View showing the back side of the gong, with washers as spacers and the castle nut
View showing the downwards angle of the gong, achieved with the washer spacers
Page updated
Google Sites
Report abuse